dynax SEAM is easily applied with a brush to protect welded joints, seams and overlapped panel work.
It provides high levels of protection against abrasion, stone chip damage and corrosion.
The non-stringing formulation holds brush marks well so that OEM finishes can be replicated.
With solids content in excess of 50% this product will outperform competing materials.
Single pack air curing seam sealer.
Perfects and protects seams with OEM quality finish and appearance.
Easy-to-use non stringing formulation.
Grey finish to compliment all top coats.
Supplied in a 1 litre lever lid tin.
Ensure that surfaces are dry and free of any contamination, degrease thoroughly with panel-wipe or clean solvent such as xylene.
Apply seam sealer generously and evenly with a brush along the seam. Achieve a dry film thickness of 200 microns over thinnest point.
Drying time with vary with temperature, humidity and air movement, but typically 6-10 minutes to surface dry and 8-10 hours to fully cure.
Accepts a wide range of paint finishes once fully cured.
Always test at small scale your chosen paint system in full before use.