Bilt-Hamber Laboratories - Corrosion Removal

Customer Login


How to use Deox-C 1) This cam shaft is from a Junkers 88 world war II combat aircraft crashed 3rd march 1943 in Burnham Essex England and buried until 25th august 1985. Severe corrosion had occurred during the 41 year burial period.	4) After a 12 hour period at room temperature the solution has turned pale yellow. A Deox-C bath gets darker with use and is only exhausted when it’s completely black.	Deox-C Introduction Deox-C Quick Guide How to use Deox-C - Download Deox-C how to tech sheet Purchase Deox-C "have found the Deox-C to be quite amazing….I would recommend it to anybody who demands excellence." Mr C Bristow, East Sussex "I write to say how pleased I am with your product Deox-C. It proved very effective at removing deep pitted rust and I found it very easy to use and very eco friendly." D S Interiors, Lancs
2) Deox-C solutions can be varied in strength from 5-20%. For the heavy corrosion on the cam shaft a 10 % solution was made by adding 1 part powder to 9 parts water.	5) By gently agitating the surface with a stiff -bristled brush any corrosion deposit clinging by surface tension is released.
3) The geared end is submerged into the crystal clear Deox-C bath.	6) The resulting surface is microscopically clean and ready for coating, plating or preservation.