Auto-clay Quick Guide

• Run your fingers over you freshly washed and dried paint work.  Feel for a rough, gritty texture, this is caused by embedded particles.  Bonnets are often most contaminated.
• If you can feel these particles atomise a fine mist of clean tap water over a 2-3 square feet area, using a plant mister or suitable spray. 
• Glide the clay bar over the wet surface, properly lubricated clay will move effortlessly just like an ice hocky puck on ice.
• You may well hear the contamination at first, this will quickly reduce as you move the bar back-and-forth.  Keep the bar moving until the noise has gone
• Check again with you finger tips to check that all the contamination was removed.
• Once you car’s paint is glass smooth - and it really will be - use Auto-balm to seal the pores and provide a deep gloss shine.

Auto-clay Quick Guide

How to use Auto-clay

Purchase Auto-clay

"...looks more like a large square of plasticine but it makes an excellent job of removing surface debris, without resorting to harsh abrasives that actually eat into the paintwork.

Auto-clay is the first one we’ve tried that can be used with water.  Most need a special lubricant.  We were surprised to find it more effective than the others too, as it looks and fells almost identical."
Car Mechanics, July 2005